Discover your new wild world

2010 John Deere 300D Dump Truck (ADT)

2010 John Deere 300D articulated haul Dump Truck (ADT),  A/C , Enclosed Cab, 8,794 Hours, Good Tyres, Serial Number   1DW300DTAA0630259, Excellent condition.

New Minyu Cone Crusher

Minyu MCC51 (WLC1300) Cone Crusher, Maxim feed size=”200mm,” mini of discharge size=”16mm,” motor=”132kw-160kw
capacity=150-200TPH

Beyer BM2512R Screening Plant. Ideal for use with the Beyer 750 or 1050 crushers, 74HP Perkins Tier4 diesel, 5-1/2 yd Hopper, 30″ Variable speed feeder, 4′ x 8′ 2-Deck screen, 26″ x 18′ Fines Conveyor (9′-10″ discharge height), 20″ x 20′ Middles Conveyor, 20″ x 20′ Overs Conveyor, 70-100 TPH Production, Air brakes on trailer. Generator Requiements: 35kW, 1800rpm. Electrical Required: 480 volt, 3-Phase, 60 Hz. Approx

2008 Caterpillar 740 EJECTOR ADT

Caterpillar 740 EJECTOR 15,000 Hours, A/C, Heat, Retarder, 29.5Rx25 tyres, Tier 3 eng. Serial Number B1R00296

New CSC Conveyor Sales 30×40 Conveyor / Stacker

10 HP WorldWide industrial grade motor and Falk Rexnord 5203J shaft mount reducer. 12″ Lagged directional head pulley with 1 15/16″ diameter head shaft, bushings and Sealmaster bearings.
12″ Self-cleaning flat bar tail pulley with 1 15/16″ diameter tail shaft, bushings, Sealmaster bearings and adjustable 16″ take-ups. 35° x 5″ dia. CEMA “C” troughing and return rollers.
10″ deep channel frame construction. 6′ receiving hopper with 6″ rubber flashing. 2-ply belting with 3/16″x1/16″ covers.
Drive, nip, pinch-rail, tail pulley guards.
Belt speed approximately 250 FPM.

2007 Case 340B Dump Truck (ADT)

2007 CASE 340B ARTICULATING DUMP TRUCK, 40 TON, 5465 HRS, A/C, HEAT, 29.5X25 RUBBER

New GCS 30X60 Conveyor

New GCS Road Portable Radial Stacking Conveyor 30″ x 60′, 19′ Discharge height, 24″ deep truss, 1/4″ x 3″ x3″ cords, 1/4″ x2″ x2″ lattice, 16″ dual wheel, Manual fold bar at the tail, Light bar package, Pintle hitch. Dimensions Axel: 11′ telescoped, 8’5″ collapsed (11’7″ in radial position), Overall Length: 44′, Overall height: 12′

2012 Komatsu HM300-3 Articulated Truck

Used Komatsu HM300-3  articulated Truck (ADT), 8,794 Hours A/C , Enclosed Cab, Tail Gate, Tier 4. Good Tyres. Excellent condition.

2019 Rock Systems 101-36-RF Reclaim Feeder

Rock Systems Model 101-36RF Reclaim Feeder complete as follows:
a) 6’-7” x 11’ wide hopper opening with 10 tons struck storage capacity (based on material weighing 100 lbs/cu ft.); hopper constructed of 1/4” thick steel plate with 6” x 4” rectangular tubing at the top of the hopper and angle iron reinforcing at the mid-section and bottom section; self-relieving tapered hopper bottom opening to minimize bridging; full length skirtboards with Hercules 3/4″ x 6″ adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; radial discharge gate to control material flow from the hopper.

b) Heavy duty semi-portable support structure constructed of 4” x 4” square tubing with wide flange beam skid frame. 1/4” plate bulkheads on both sides and rear of structure; 2’ tall vertical front wing extension; 6’ long x 12’ tall folding side wing extensions.

Pegson 428 Trakpactor Impact Crusher

2004 Terex Pegson 48 in. x 42 in. Impact crusher, diesel 6 cyl, 7 ft x 13 ft Feeder, 42 in. x 30 ft under crusher disch conv, 24 in. x 12 ft side disch conv, 30 in. magnet.

2010 Anaconda ST6032 Conveyor

Used Anaconda ST6032 Conveyor. Cat 2.2 Diesel. Radial stacker. 1,853 Hours, New bearings on discharge pulley and new shaft

2002 Roto Screen R454 II Screening Plant

Used Roto SCREEN R454 II Screening Plant. 3,792 Hours, Deutz engine. In good condition

New CSC Conveyor Sales 36″ x 40′ Channel Frame

Conveyor Sales 36″ x 40′ Channel Frame
15 HP WorldWide industrial grade motor and Falk Rexnord 5203J shaft mount reducer. 12″ Lagged directional head pulley with 2 3/16″ diameter head shaft, bushings and Sealmaster bearings. .
12″ Self-cleaning flat bar tail pulley with 2 3/16″ diameter tail shaft, bushings, Sealmaster bearings and adjustable 16″ take-ups. 35° x 5″ dia. CEMA “C” troughing and return rollers. 10″ deep channel frame construction. 6′ receiving hopper with 6″ rubber flashing. 2-ply belting with 3/16″x1/16″ covers. Drive, nip, pinch-rail, tail pulley guards.
Belt speed approximately 250 FPM.

2001 Volvo A35D ADT

2001 Volvo A35D articulated haul truck. Transmission Automatic, Enclosed Cab, 4194 Hours, Mega Bonus Bed with tailgate. Transmission Automatic, A/C cab, 26.5 R25 Radial rubber @80%. Very clean.

Barmac Rotopactor MKII Jaw Crusher

2002 Barmac Rotopactor MK 2 Jaw Crusher. Inside was completely rebuilt within the last 1,000 hrs, including Rotor, Anvil Rings, bearings, Shiv, all with ISC parts.

1999 Erin Starscreener 300 Screening Plant

Erin Starscreener 300 Screening Plant, Deutz Diesel, 12,813 Hrs, New Lower Belt, Top DecK Finger Screen.

1996 Moxy MT30S3 ADT

MOXY MT30 6X6 Articulated Dump Truck (ADT), GOOD BOX, A/C BLOWS COLD, 6 SPD AUTO TRANS, TIGHT CENTER, SCANIA 6 CYL ENGINE, RUNS AND OPERATES WELL.

2000 Wildcat RHC5140 Screening Plant

Used  Wildcat RHC5140 Screening Plant. Trommel screen, two 6 ft drums, both 3/4″, 4 cyl John Deere diesel engine, 36″ wide belts, 10 ft x 5 ft hopper, needs to be hauled on lowboy. In good condition

Used GCS FFC Conveyor. The FFC (Flip Feed Conveyor) features a unique “flipping” hopper to accommodate wide Ioader buckets that dumps material onto the conveyor. Dimensions Length 53 ft & Width 102 in, 26HP Gas Honda, 36″ x 50′, 1yrd Hopper, 9′-6″ Hopper width, 15′-8″ discharge height, UHM Plastic lined hopper, Hydraulic raise and dump control, Remote Control, Cleated belt, Pit Portable Radial Conveyor.

Powerscreen Premiertrak 400 Jaw Crusher

2014 Powerscreen PREMIERTRAK 400 Crushing Plant. 3,850 Hours, 375HP Scania engine, New vulcanized belt, new scraper, approx 75% on jaws. Excellent condition.

2018 Edge MS50 Conveyor 50X32

Used Edge MS50 Conveyor 50X32. 1,352 Hours, Hydr. Serial Number 18MS5032384

2008 Terex TA40 Dump Truck (ADT)

Enclosed Cab w/ Heat & A/C!, Detroit Diesel Series 60 Tier III Engine, 450hp (335.6kw) @ 2,000RPM, 4,056 Hours, Drive 6WD, Operating Weight: 67,804lbs, 40 Ton capacity, Good Rubber, Straight Bed, Length: 35.8ft/in (10900mm), Width: 11.2ft/in (3400mm), Height: 12.8ft/in (3900mm), Wheelbase: 17.4ft/in (5300mm), Ground Clearance: 3ft/in (900mm), Dump Height: 22.6ft/in (6900mm), Dump Ground Clearance: 3ft/in (900mm), Serial Number A8651271

2018 Gator 36″X25′ Washer / Sandscrew

Like New  Gator 36″X25′ Fine Material Washer / Sandscrew. Size: 36″ screw diameter; 25′ tub length, Machine weight: 6214 kg, 100 TPH capacity at 21 RPM, Maximum material size: 3/8″ diameter, Driven sheave: 7.4″ in diameter, Drive sheave: 5.4″ in diameter, 3 groove, B-Section, Motor specifications: 15 HP, 1800 RPM, TEFC

Rock Tough Static Grizzly, Skid Steer Model, 7’-11” wide x 7’ tall x 5’ deep constructed of 3” x 3” x 3/16” square tubing, 3/16” steel plate sidewalls, 3/16” steel plate front wall, grizzly bars constructed of 2 1/2” x 2 1/2” x 3/16” square tubing, grizzly bars bolt-in and are adjustable in 3/4” increments, screen angle set at 40 degree slope. Starting grizzly bar opening at 2 1/4”. Total weight 680 kg.

Trio TSW3625 36 x 25’ long Single spiral sandscrew

New Trio model TSW3625 36” diameter x 25’ long single spiral sandscrew complete with 15 hp electric motor, v-belt drive and drive guard; heavy duty gear reducer with oil bath lubrication; full flare tub with adjustable weirs; bolt-on replaceable Ni-hard abrasion resistant wear shoes; grease lubricated lower bearing assembly mounted outside the tub; curved trough plate with perforated holes for rising current feature; support leg; discharge chute.

2017 Rock Systems 101-30-RG Feeder

Rock Systems Model 101-30RG RAP bin feeder complete as follows:

a. 7’-8″ wide x 13’ long hopper opening constructed from 1/4” thick steel plate with square tube reinforcing at the hopper top and angle iron reinforcing at the hopper mid-section and bottom section; self-relieving tapered hopper bottom opening from 16″ to 22″ to minimize bridging; full length skirtboards with 3/4″ x 6″ adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; adjustable discharge gate with hand crank to control material flow from each hopper.

b. Adjustable height sloping grizzly with 6” grizzly grid made out of angle iron, flatbar and round stock.

c. Steel fabricated structure constructed of square tubing and 1/2” thick base plates.

2011 Conveyor 36″ x 60′ Portable Conveyor

Used Conveyor 36″ x 60′ Portable Conveyor. Straight axle undercarraige. 20HP electric motor drive with Leroy Somers 207 shaft mounted speed reducer. 16″ Lagged directional head pulley with 2 7/16″ diameter head shaft.16″ Self-cleaning flat bar tail pulley with 2 7/16″ diameter tail shaft and adjustable 44″ take-ups. 35° x 5″ dia.

2016 Rock Systems 802-RSI Pugmill Plant

Rock Systems 802-RSI Portable Pugmill Plant

. a. 36″ wide x 33’ long pugmill feed conveyor with 15 h.p. electric motor, Dodge TXT4 shaft mount speed reducer with internal backstop, v-belt drive and OSHA drive guard; 14″ diameter rubber lagged head pulley; 12″ diameter self-cleaning tail pulley; screw take-up assemblies; OSHA tail terminal guard; CEMA “C” troughing and return idlers with 5″ diameter rolls; 3 ply conveyor belting; Flexco Rockline belt scraper installed.

b. Pugmill Systems timed twin shaft pugmill mixer model 750BT with dual 50 Hp electric motor drives, timing gears, liquid additive spray bar, access covers on pugmill, reversible hi-chrome paddle tips, contour AR liners.

2002 Vermeer D18x22 Directional Drill

Used Vermeer Navigator D18x22 Directional Drill, Crawler Mounted, Drill Pipe, CAT Engine, Hour Meter Reads: 3,308, S/N: 1VRX170S221000102; Includes: 2003 Redi-Haul FSL1827BE 21′ Tandem Axel Trailer, Beaver Tail, Pintle Hitch, Loading Ramps, VIN: 47SS182T231019906; Est. 2000 Ditch Witch MM5 Mud Mixer, S/N: 2T1648; Underground Magnetics Mag 3 Pak 3 w/ Accessories.

Ami 8×10 Grizzly Screen, 7’-11” wide x 7’ tall x 5’ deep constructed of 3” x 3” x 3/16” square tubing, 3/16” steel plate sidewalls, 3/16” steel plate front wall, grizzly bars constructed of 2 1/2” x 2 1/2” x 3/16” square tubing, grizzly bars bolt-in and are adjustable in 3/4” increments, screen angle set at 40 degree slope. Starting grizzly bar opening at 2 1/4”. Total weight 693 kg

2016 Rock Systems 101-24 Hopper

New Rock Systems 101-24 front end loader hopper with belt feeder complete with 6’-4” x 11’-0” top hopper opening, hopper constructed of 1/4” plate with angle iron reinforcing, self-relieving tapered hopper bottom opening, full length skirtboards with adjustable rubber flashing, adjustable discharge gate with hand crank to control material flow from the hopper, 24″ wide x 13’-8” long belt feeder with Nord 5 h.p. gearmotor drive, 18″ diameter rubber lagged head pulley, 16″ diameter tail pulley, screw take-up assemblies, tail terminal guard and side nip guards.

2018 RD Olson 516 Wash Plant

RD Olson portable wash plant with 5’ wide x 16’ long triple deck incline wet screen, 20 h.p. electric motor drive, 100 mm bearings with oil bath lubrication, manifold for water supply with 5 spray bar wash system per deck, rubber hoses and ball valves, slurry feed box, individual oversize discharge chutes with AR liners, collecting hopper mounted under the screen, walkway with handrails on 3 sides of the screen with 2 access ladders;

New Rock Systems 501-3640 36”x40’ Conveyor

New Rock Systems 501-3640 – 36” x 40’ Stackable Conveyor

Head terminal Weg 10 h.p. TEFC electric motor; Dodge TXT3 shaft mount speed reducer with internal backstop; v-belt drive and OSHA approved drive guard; Dodge 14” dia rubber lagged head pulley mounted on 2-3/16” dia 1045TGP shafting with Dodge SCM pillow block bearings; head pulley nip guards.

*Tail terminal Dodge 12” dia self-cleaning tail pulley mounted on 1-15/16” dia 1045TGP shafting with Dodge SCM pillow block bearings; screw take-up assemblies; OSHA approved tail terminal guard.

Rock Systems 108-2P Conveyor

New Rock Systems 108-2P Conveyor. Portable 2 Bin Blending Hopper.
*Each hopper is 9’-6” wide x 14’ long with 20 tons storage capacity

Rock Systems 108-3P Conveyor

New Rock Systems 108-3P Conveyor. Portable 3 Bin Blending Hopper. 

*Each hopper is 9’-6” wide x 14’ long with 20 tons storage capacity 1/4” thick steel plate. Self-relieving tapered hopper bottom opening minimize bridging; full length skirtboards with Hercules 3/4″ x 6″ adjustable rubber flashing prevent leakage between hopper bottom and belt feeder; adjustable discharge gate with hand crank control material flow from each hopper.

*Each belt feeder is 30” wide x 8’ long with Nord 5 Hp gearmotor drive; 12” diameter rubber lagged head & 12” dia self-cleaning tail pulley mounted on Dodge 2-7/16” SCM pillow block bearings; screw take-up assemblies; CEMA “C” flat belt idlers with 5” dia rolls, 3 ply vulcanized endless conveyor belting. Belt speed setup for 90 fpm.

2017 Rock Systems 101-36-G Loader Hopper

Rock Systems 101-36-G Front End Loader Hopper with Belt Feeder
a) 14’-0” wide hopper opening with 20 cubic yard struck storage capacity; hopper constructed of 1/4” thick steel plate with 6” x 4” rectangular tubing at the top of the hopper and angle iron reinforcing at the mid-section and bottom section; self-relieving tapered hopper bottom opening to minimize bridging; full length skirtboards with Hercules 3/4″ x 6″ adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; radial discharge gate to control material flow from the hopper.

b) Hydraulic tipping grizzly with nominal 6” spacing to remove oversize material; grizzly bars constructed of 1” x 5” flat bar; framework constructed of square tubing with steel plate and reinforcing ribs; 10 h.p. electric/hydraulic power package with hydraulic cylinders, hoses, fittings and radio remote control.

c) Heavy duty semi-portable support structure constructed of 4” x 4” square tubing with wide flange beam skid frame. 6’ tall bulkhead on both sides of structure.